Approaches to enhance 188bet 88betapp value of Ca Voi Xanh gas via its transformation into nanocarbon materials

12/11/2018 7540 lượt xem
Nguyen Huu Luong (1), Nguyen Hoang Viet (1), Nguyen Van Dung (2) 1.Vietnam Petroleum Institute 2.Ho Chi Minh City University of Technology Email: luongnh@vpi.pvn.vn

Summary

Ca Voi Xanh gas has high contents of impurities, namely H2S, CO2 and N2. 188bet 88betapp transformation of this gas into high-value products is a potential approach to enhance its value without pre-treatment. In fact, it is a promising feedstock for nanocarbon production, including carbon nanotubes (CNT) and carbon nanofibres (CNF). Their applications can be found in various areas of which markets are promising. Two methods for nanocarbon production can be considered, namely methane decomposition and dry reforming of methane. Methane decomposition brings higher nanocarbon yields while dry reforming of methane can produce better quality nanocarbon products. A number of issues need to be solved before these processes can be commercialised, such as improvements of nanocarbon yields and their recovery methods.

Key words: Ca Voi Xanh gas, carbon nanotubes, carbon nanofibres, methane decomposition, dry reforming.

1. Introduction

In 2011, Ca Voi Xanh gas field was discovered about 100km off 188bet 88betapp coast of 188bet 88betapp central region of Vietnam. Its reserve was found more than 150 billion m3 of natural gas. However, its gas composition consists of high contents of impurities, namely H2S, CO2 and N2. Table 1 shows its nhydrocarbon and non-hydrocarbon composition [1]. It can be seen that this gas contains significant contents of undesired components, including 0.21% of H2S, 9.88% of N2 and 30.26% of CO2. As fuel for power generation, 188bet 88betapp gas will be treated for H2S removal so that its remaining H2S content is less than 30ppm. On 188bet 88betapp other hand, CO2 and/or N2 removal should be considered upon its uses and available technologies for its treatment and deep processing. It is, therefore, interesting and significant to develop new technologies that can transform Ca Voi Xanh gas into high-value products without pre-treatment for CO2 and/or N2 removal.

 

Table 1. Composition of Ca Voi Xanh gas

A potential approach to enhance 188bet 88betapp value of Ca Voi Xanh gas is to transform it into high-value products such as carbon nanotubes (CNT) and carbon nanofibres (CNF). Nanocarbon materials can be produced from hydrocarbons, oxygens, and even CO2. One of 188bet 88betapp popular feedstocks for CNT production is methane. In terms of economy, a preliminary estimation shows that dry reforming of methane and methane decomposition are possible approaches to compete with 188bet 88betapp current method of hydrogen production using steam reforming of methane if 188bet 88betapp values of CNT and CNF as by-products are included [2]. In fact, by this approach, Ca Voi Xanh gas can be processed without any pre-treatment for CO2 and N2 removal. However, a number of issues need to be resolved before it can be commercialised, including 188bet 88betapp improvement of feed conversion and nanocarbon selectivity, as well as recovery methods. Therefore, it is important to investigate 188bet 88betapp potential of transformation of this gas into nanocarbon materials.

2. Markets for nanocarbon materials

188bet 88betapp world demand for CNT was 5,000 tons/year in 2014 and predicted to be 20,000 tons/year by 2022. CNT’s sale price is in 188bet 88betapp wide range of USD 0.1 - 600/gram depending upon its quality and application [3]. For high quality SWCNT (single-walled CNT), 188bet 88betapp market price can be well above USD 1,000/gram. Applications of CNT can be found in various areas, including plastics, electronics, and batteries, etc. 188bet 88betapp global demand for CNF is even higher than for CNT, with 70,000 tons/year in 2016 and is forecasted to be 100,000 tons/year by 2022. 188bet 88betapp sale price of CNF is in 188bet 88betapp range of USD 25 - 113/kg [3]. CNF can be used in various industries such as energy, materials, aerospace, textiles, and construction, etc. Table 2 shows market analysis for various carbon products.

(a)Based on stoichiometric ratio of carbon to hydrogen present in methane. Does not take into account process eflciency or use of hydrogen to provide process heat or loss of hydrogen during hydrogen recovery.

 

Table 2. Market analysis for various carbon products [3]

188bet 88betapp CNT market is predicted to grow from USD 3.95 billion in 2017 to USD 8.7 billion by 2022 [4]. A certain of current CNT producers can be listed as Arkema S.A. (France), Arry International Group Ltd. (China), Carbon Solutions Inc. (US), Cheap Tubes Inc. (US), CNano Technology Ltd. (US), CNT Company Ltd. (South Korea), Hanwha Chemical Co. Ltd. (South Korea), Hyperion Catalysis International Inc. (US), Kumho Petrochemical Company Ltd. (South Korea), Nano-C Inc.(US), Nanocyl S.A. (Belgium), NanoIntegris Inc. (US), NanoLab, Inc. (US), Nanoshell LLC (US), Nanothinx S.A. (Greece), Showa Denko

K.K. (Japan), SouthWest NanoTechnologies Inc. (US), Thomas Swan & Co. Ltd. (UK), and Toray Industries, Inc. (Japan). Currently, 188bet 88betapp United States, China, and Turkey are 188bet 88betapp top countries in CNT production with productivity of 34%, 32%, and 12%, respectively [3].

3. Methods to transform natural gas into nanocarbon materials

Being a valuable material, it is evident that much focus in academia and industry is on 188bet 88betapp synthesis of this material, especially from abundant sources such as natural gas. Based on methane or natural gas as feedstock, CNT and CNF can be produced in two ways: (1) methane decomposition; (2) dry reforming [4 - 10]. These processes also generate hydrogen or syngas that can be used as feedstock for refineries and petrochemical plants.

3.1. Methane decomposition

To date, CNT is often produced via arc discharge, laser ablation or catalytic chemical vapour deposition (CCVD). Of these approaches, CCVD is 188bet 88betapp most promising for medium scale production due to its high yield of CNT from 188bet 88betapp precursor, low energy cost and good controllability [10]. Currently, CNT and CNF production is mainly based on methane decomposition (Equation 1). It has been found that selectivity to CNT and CNF is 50 - 70% and depends on feed purity, reaction temperature, and catalyst nature. From Table 1, it can be seen that Ca Voi Xanh gas owns very low concentration of C2+ hydrocarbons, therefore, it seems to be an ideal feedstock for high quality CNT and CNF production.

 

 

 

Figure 1. Diagrammatic representation of 188bet 88betapp CCVD for CNT production [11].

188bet 88betapp CCVD process of natural gas principally involves 188bet 88betapp decomposition of methane molecules to form deposited carbon and hydrogen gas, which is a valuable by-product. Due to strong C-H bonds, this decomposition process is typically conducted inside 188bet 88betapp range of 750 - 1,000oC [11, 12]. It is well known that CNT is formed at elevated temperature, whilst carbon nanofibres (CNF) is formed at lower temperature. This fact is explained by 188bet 88betapp competition between carbon nucleation step on 188bet 88betapp catalytic surface and diffusion of carbon atoms along 188bet 88betapp formed CNT. A diagrammatic representation of 188bet 88betapp CCVD is illustrated in Figure 1.

Main catalysts used in 188bet 88betapp synthesis of CNT are Ni, Fe and Co because these materials are economical, catalytically active and having good carbon solubility [9, 12]. Particularly for Ni, 188bet 88betapp formation of amorphous carbon at high temperature is an issue which requires special design of carrier phase [13]. Depending on 188bet 88betapp strong or weak interaction between catalytic particles and carrier phase, base-growth (e.g. most Fe-based catalysts) or tip-growth are 188bet 88betapp two widely accepted mechanisms for 188bet 88betapp formation of CNT. 188bet 88betapp use of substrate with well- defined distribution of catalytic particle sizes successfully permits 188bet 88betapp alignment and diameter control of SWCNT growth from ethylene [14] and highly pure methane [15]. Synthesis of SWCNT from methane was also reported at “soft” conditions (i.e. 680oC) using Fe and promoter Mo on alumina as catalyst, though 188bet 88betapp product yield (by catalyst weight) is only about 20% [16]. Production of CNT from usual catalyst powder is possible, but potential drawbacks are 188bet 88betapp lack of directional control and additional purification step, which can be time-consuming. Growth of CNT from metal-free substrate such as SiOx or SiC is attractive since metal impurities in end products are low but 188bet 88betapp underlying mechanism is less well understood [17, 18].

Although 188bet 88betapp presence of CO2 in 188bet 88betapp feedstock reduces carbon yield during CCVD process, 188bet 88betapp following benefits are also included: (1) CNF selectivity is increased because amorphous carbon is removed; (2) required temperature for CNF formation is lowered, from higher than 700oC down to 600oC; and (3) smaller tube diameter and improved oxidative properties of 188bet 88betapp CNF/CNT products [8]. It has been found that feed with an equal molar ratio of CH4/CO2 brings 188bet 88betapp best result. In addition, if 188bet 88betapp reaction is carried out at 700oC, CNT is found to be 188bet 88betapp main nanocarbon product. However, several challenges still need to be addressed before CNT production technology reaches maturity, for example 188bet 88betapp selective growing of metallic or semi-conducting CNT, control of wall number, chirality and defects in 188bet 88betapp final products [18]. Ca Voi Xanh gas contains approximately 30% of CO2, it is therefore worthy to investigate its transformation into CNF and CNT products.

3.2. Dry reforming of methane

Dry reforming of methane has been studied for syngas production (Equation 2) but could not be commercialised due to strong coke formation, leading to fast catalyst deactivation. 

 

Recently, this process has been interested in 188bet 88betapp aspect of CNT and CNF production. This process generates high-quality nanocarbon products but its conversion is much lower than methane decomposition [8]. Therefore, it is necessary to develop more effective catalysts and nanocarbon recovery methods. Compared with 188bet 88betapp way of methane decomposition, dry reforming can be carried out at lower temperature and produce syngas as feedstock for petrochemical industry. Table 3 shows results for CNT production by various methods.

It has been reported that factors, namely ratio of CH4/ CO2, reaction temperature, and catalyst composition, have significant influences on CNT yield and quality during dry reforming of methane. 188bet 88betapp optimum condition for 188bet 88betapp best result was obtained at 188bet 88betapp CH4/CO2 ratio of 2.125, temperature of 700oC, and Ni-based catalyst [5]. Thus, Ca Voi Xanh gas is a good candidate as feedstock for this process. Similar to CCVD, there are still a number of issues to be resolved so that this process can be commercialised, including: (1) development of new catalysts that lower 188bet 88betapp reaction temperature to below 700oC and improve conversions of CH4 và CO2 for CNT formation, as well as catalyst life; (2) development of effective methods of nanocarbon recovery; and (3) controllability of product physical and chemical properties.

 4. Applications of nanocarbon materials

 CNT has promising applications in development of materials science, electronic products and medical engineering. Because CNT is a good conductor, 188bet 88betapp material has been commercially used as a conducting additive for lithium-ion battery anode and cathode. Furthermore, loading of iron oxide into multi-walled CNT (MWCNT) has shown stable and high specific capacity after many cycles [19]. Protocol for development of field-effect transistor based on SWCNT has even been proposed, but widespread applications are yet to be seen due to inconsistent electrical performance [20, 21]. CNT can also be used as cathode in high-performance Field- Emission Lamp (FEL) thanks to 188bet 88betapp material’s excellent conductivity and mechanical/chemical stability. In addition, 188bet 88betapp CNT-based cathode has low energy consumption, good efficiency and is able to generate different colours [21].

 

Table 3. A summary of various methods of CNT production [19]

Thanks to exceptional stiffness and strength, CNT holds great promise for fabrication of nanoelectromechanical  systems (NEMS), including mass/force sensors and actuators. Another area for potential application of CNT is biomedical engineering such as drug delivery system and tissue engineering scaffolds [22]. Especially regarding 188bet 88betapp latter, 188bet 88betapp inclusion of CNT into 188bet 88betapp natural tissues helps improve material resilience. However, issues of cytotoxicity need to be resolved to ensure safe applications of CNT- based components in human body. Combination of engineered polymers and MWCNT is another area which currently attracts attention [2]. Finally, CNT can also be used in paint coating, drilling muds and water purification systems [23].

5. Conclusions

Ca Voi Xanh gas is a promising feedstock for nanocarbon production, including carbon nanotubes (CNT) and carbon nanofibers (CNF). Two methods for nanocarbon production can be considered, namely methane decomposition and dry reforming of methane. Methane decomposition brings higher nanocarbon yield while dry reforming of methane can produce better quality nanocarbon products. However, several challenges still need to be addressed before CNT and CNF production technology reaches maturity, including: (1) development of new catalysts that lower 188bet 88betapp reaction temperature to below 700oC and improve conversions of CH4 và CO2 for CNT and CNF formation, as well as catalyst life; (2) development of effective methods of nanocarbonrecovery; and (3) controllability of product physical and chemical properties.

References

1. ExxonMobil, PVN, PVEP, PSC Blocks 117-119. Outline development plan (ODP) summary. 2016.

 2. Robert A.Dagle, Vanessa Dagle, Mark D.Bearden, Jamelyn D.Holladay, Theodore R.Krause, Shabbir Ahmed. An overview of natural gas conversion technologies for co-production of hydrogen and value-added solid carbon products. 2017.

3. R.Dagle, V.Dagle, M.Bearden, J.Holladay, T.Krause, S.Ahmed. R&D opportunities for development of natural gas conversion technologies for co-production of hydrogen and value-added solid carbon products. Argonne National Lab Report. 2017.

4. Marketsandmarkets. Carbon nanotubes market worth 8.70 billion USD by 2022. www.marketsandmarkets. com/PressReleases/carbon-nanotubes.asp.

5. Tiago P.Braga, Regina C.R.Santos, Barbara M.C.Sales, Bruno R.da Silva, Antônio N.Pinheiro, Edson R.Leite, Antoninho Valentini. CO2 mitigation by carbon nanotube formation during dry reforming of methane analyzed by factorial design combined with response surface methodology. Chinese Journal of Catalysis. 2014; 35(4): p. 514 - 523.
6. Zirui Jia, Kaichang Kou, Ming Qin, Hongjing Wu, Fabrizio Puleo, Leonarda Liotta. Controllable and large- scale synthesis of carbon nanostructures: A review on bamboo-like nanotubes. 2017; 7(9): p. 256 - 276.

7. Kapil Moothi. Carbon nanotube production from greenhouse gases during syngas synthesis. University of 188bet 88betapp Witwatersrand. 2009.

8. Steven Corthals, Jasper Van Noyen, Jan Geboers, Tom Vosch, Duoduo Liang, Xiaoxing Ke, Johan Hofkens, Gustaaf Van Tendeloo, Pierre Jacobs, Bert Sels. 188bet 88betapp beneficial effect of CO2 in 188bet 88betapp low temperature synthesis of high quality carbon nanofibers and thin multiwalled carbon nanotubes from CH4 over Ni catalysts. Carbon. 2012; 50(2): p. 372 - 384.

9. S.Shukrullah, Norani Muti Mohammed, Maizatul Shaharun, Muhammad Yasin Naz. Mass production of carbon nanotubes using fluidized bed reactor: A short review. Trends in Applied Sciences Research. 2014; 9(3): p. 121 - 131.
10. Noel Peter Bengzon Tan, Bing Hui Chen. Investigation of a fluidized bed chemical vapor deposition (FBCVD) reactor towards a large-scale multi-walled carbon nanotubes. International Journal of Engineering Research & Technology. 2014; 3(5): p. 605 - 610.

11. Siang-Piao Chai, Sharif H.Zein, Abdul Rahman Mohamed. A review on carbon nanotubes production via catalytic methane decomposition. NAPCOL. 2004.

12. Jie Liu, Shoushan Fan, Hongjie Dai. Recent advances in methods of forming carbon nanotubes. Advances in Carbon Nanotubes. 2004; 29(4): p. 244 -250.

13. Arash Yahyazadeh, Behnam Khoshandam. Carbon nanotube synthesis via 188bet 88betapp catalytic chemical vapor deposition of methane in 188bet 88betapp presence of iron, molybdenum, and iron-molybdenum alloy thin layer catalysts. Results in Physics. 2017; 7: p. 3826 - 3837.

14. Kenji Hata, Don N.Futaba, Kohei Mizuno,Tatsunori Namai, Motoo Yumura, Sumio Iijima. Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes. Science. 2004; 306(5700): p. 1362 - 1364.

15. T.Maneerung, K.Hidajat, S.Kawi. LaNiO3 perovskite catalyst precursor for rapid decomposition of methane: Influence of temperature and presence of H2 in feed stream. Catalysis Today. 2011; 171(1): p. 24 - 35.

16. Avetik R.Harutyunyan, Bhabendra K.Pradhan, U.J.Kim, Gugang Chen, P.C.Eklund. CVD synthesis of single wall carbon nanotubes under “soft” conditions. Nano Letters. 2002; 2(5): p 525 - 530.

17. Chang Liu, Hui-Ming Cheng. Carbon nanotubes: Controlled growth and application. Materials Today. 2013; 16(1-2): p. 19 - 28.

18. Mukul Kumar, Yoshinori Ando. Carbon nanotube synthesis and growth mechanism. Nanotechnology Perceptions. 2010; 6(1): p. 7 - 28.

19. Poonam Sehrawat, C.Julien, SS.Islam. Carbon nanotubes in Li-ion batteries: A review. Materials Science and Engineering B. 2016; 213: p. 12-40.

20. Sehrawat et al. Carbon nanotubes in Li-ion batteries: A review. Materials Science and Engineering B. 2016; 213: p. 12 - 40.

21. Qing Zhang. Carbon nanotubes and their applications. CRC Press. 2012.

22. http://www.yac.co.jp/en/-/fel/fel1.

23. Chaenyung Cha, Su Ryon Shin, Nasim Annabi, Mehmet R.Dokmeci, Ali Khademhosseini. Carbon-based nanomaterials: Multi-functional materials for biomedical engineering. ACS Nano. 2013; 7(4): p. 2891 - 2897.

24. www.futuremarketsinc.com. 188bet 88betapp global market for carbon nanotubes-forecast from 2010 to 2024.

Chia sẻ: